Forum set show off

Thought I'd make a matching forum set to match the tag I made earlier on and here are the results, the animation I used was made by Simone which can be found Here

Tag show off

I made this tag the other day, with a tube by The hunter and a scrap kit by Bibi's collection called sorceress. Both of them can be bought from SATC

A Fairy Autumn Harvest Cluster Frame

I made a FTU cluster frame using Kittie Sinful Designz 'A Fairy Autumn Harvest' . You can buy this kit and all her other kits from Mystical Scraps. Click on the download link to get the frame.

DOWNLOAD

A Fairy Autumn Harvest Forum Set

I made this as a matching set for my A fairy autumn harvest tag.

 This tutorial was done with my own ideas any similarities are purely coincidental. This tutorial is there for a guide you do not need to copy it exact be as creative as you like.

Supplies needed

Psp, I am using psp x4, but any version will do.

Tube of choice: I used the gorgeous art of Barbara Jensen

PTU kit by Kittie's Sinful Designs call A Fairy Autumn Harvest. You can buy this kit from Mystical Scraps

Font of choice: I used Frosting for Breakfast

Lets Begin

I used a dropshadow on each of my elements as I went along, settings used were 2,2,50,5

For the banner open up a new transparent image 600 x 250. Go to selections, select all, copy and paste a paper of choice on to the canvas.Select none.

Open up element 114. Free rotate 90 degrees left. Copy and paste to your canvas, resize by 125 percent. Grab your magic wand and click inside the frames. Selections, select all, float defloat, add a new layer. Get another paper and copy and paste into selections. keep selected. Move paper down under the frame.

Copy and paste your tube, move into one of the frames, select none. Duplicate your tube. On the duplicate, guassian blur 4 and change blend mode to screen. On the original change the blend mode to luminance legacy.

Copy, paste and resize some of the elements from the kit an place on your canvas, see my tag for ideas on where to place them. 

 When you've placed your elements to your liking, clicking on the bottom layer, selections, select all, float, defloat. Add a new layer and move up to the top.

Copy and paste a paper into the selection, modify and contract by 7 then hit delete on your keyboard. Adjust, add noise 54 percent, guassian with monochrome checked. 

Copy and paste your tube and place in the middle of your tag,

Add your copyright and name, and save as a png.

For the avatar I duplicated my tag, Shift and D.

with your crop tool crop a part of the tag you want to use as the avatar. crop the tag to the size you want your avatar, mine is 125x162. I cropped mine on the blended tubes. I also added a few elements and merged them down together then duplicated. On the duplicate, guassian blur 4 and change blend mode to screen. On the original change the blend mode to luminance legacy.

For the border do the same as your banner but contact by 5 rather than 7. 

 Add your copyright and name or initial, and save as a png.

I hope you liked my tut, would love to see your results

A Fairy Autumn Harvest

 

 This tutorial was done with my own ideas any similarities are purely coincidental. This tutorial is there for a guide you do not need to copy it exact be as creative as you like.

Supplies needed

Psp, I am using psp x4, but any version will do.

Mask of Choice: I used Mask 10 from Horseplays Pastures

Tube of choice: I used the gorgeous art of Barbara Jensen

PTU kit by Kittie's Sinful Designs call A Fairy Autumn Harvest. You can buy this kit from Mystical Scraps

Font of choice: I used Frosting for Breakfast

 

Lets Begin

I used a dropshadow on each of my elements as I went along, settings used were 2,2,50,5

 Open up a new transparent  image 700 x 700, you can resize at the end, floodfill background white

Copy and paste element 122 on to your canvas, grab your magic wand and click inside the frame. Selections, select all, float, defloat. Copy and paste one of the papers from the kit. Selections invert, and hit delete. Select none. Move the paper layer under the frame.

Back to the top, copt and paste element 97.

Copy and paste element 81, resize 50 percent then 75 percent. Move to the bottom left of the frame, duplicate then mirror. 

Copy and paste element 98. 

Element 40 resize by 50 percent, move to the right hand side of the frame, duplicate and mirror.

Add element 42 and mve up slightly

Copy and paste your tube, resizing if needed.

Add Element 114, Image, free rotate 90 degrees left. Move down to the bottom of the frame. Grab your magic wand and click inside each of the frames.   Selections, select all, float, defloat, add a new layer, copy and paste one of the papers into selection. Select down. Move down under element 114.

Copy and paste element 88, resize bt 50 percent then 75 percent then place under the middle frame. duplicate. On the duplicate, guassian blur 4 then change blend mode to screen, on th original change blend mode to luminance (legacy)

Copy and paste you tube into the 1st frame, duplicate and do the same as element 88. Repeat for the 3rd frame. 

Copy amd paste element 108 and place on t the top right of th frames,

Copy, paste and resize and other elements you like,

 Go to the background layer, copy and paste another paper  add your mask, merge group.

Add your copyright and name, resize and crop if needed, delete background layer and save as a png.

I hope you liked my tut, would love to see your results

Tag show off

Made this tag tonight for a for a challenge, tube is a gorgeous tag by misticheskaya which can be found at PFD. Scrap Kit was a kit I bought last year by Inzpired Creationz which is unfortunately not available any more.

Sweet Kisses

This tutorial was done with my own ideas any similarities are purely coincidental. This tutorial is there for a guide you do not need to copy it exact be as creative as you like.

Supplies needed

Psp, I am using psp x4, but any version will do.

Mask of Choice: I used Mask 2 from Lexi Creationz Scrapz

Tube of choice: I used the stunning art of Zlata which can be found at PFD

Scrap Kit of choice: I used an old PTU kit from Bibi's Collection

You will need to like her facebook page to get the password for the kit

Font of choice: I used Allura

Lets Begin

I used a dropshadow on each of my elements as I went along, settings used were 2,2,50,5

 Open up a new transparent  image 700 x 700, you can resize at the end, floodfill background white

Copy and paste Elem (14) on to your canvas, resize to 95 percent

Elem (19), resize to 95 percent

Elem (39), resize to 80 percent. I recoloured mine to match more with the tube but this is optonal

Go back to the layer with element (14) grab your magic want and click inside the frame. selections modify expand by 10, add a new layer, copy and paste paper (2) into selection. Selections, select none. Move your paper layer under the frame.

Go back to Elem (39), copy and paste elem (12), resize to 70 percent, move to the bottom left of the frames

Elem (62), resize 70 percent, move to the top of elem (12), duplicate and place that to th bottom of element (12).

Copy and paste elem (54), resize 70 percent and place at the bottom of the frames.

Elem (91) resize 70 percent, image free rotate 90 left, place to the left of the frames.

Elem (2) paste to the left.

Copy and paste your tube resize 

Add some more element until you are happy with how it looks

Go to the background layer, copy and paste paper (5), add your mask, merge group

Add your copyright and name, resize and crop if needed, delete background layer and save as a png.

I hope you liked my tut, would love to see your results

I'm back

Well i've started my blog up again in the hope I can show off the tags I make along with any CT work I might do. I have deleted all old posts as it mostly contains broken links and deleted pictures as I have not used this blog in over 3 years. Please excure the fact my blog is looking rather bare, I have since forgotten how do use blogger so trying to get in the swing of things